Care and Maintenance Instructions
How to care for your beautiful, new high tech polymer bath or shower & wall system
GENERAL CLEANING INSTRUCTIONS:​
For normal everyday cleaning, BCI suggests using our very own Eliminate. It is factory-approved distinctly for all of our acrylic products. It is available for sale here at LowCountry Bath Renewal. You may also use Formula 409 or Microban 24 Hour. The use of scouring pads or abrasive cleansers will dull the surface. Should you wish to use a product not listed below, test on a small area in the corner of the skirt before applying to the entire bathtub liner. Always review individual cleansers’ instructions. Rinse thoroughly after cleaning.​
RECOMMENDED CLEANERS:
BCI Eliminate , Microban 24, Formula 409, White vinegar and water may also be used to soften mineral deposits. Use 1/2 cup Clorox Bleach per gallon of water as a disinfectant.
DO NOT USE:
-
Original Clean Shower
-
Clean Shower for Plastic Showers & Glass
-
Ammonia
-
Aerosol cleaners
-
Acetone
-
Soft Scrub
-
Dawn
-
Dow disinfectant cleaner
-
Scrub Free
-
Fingernail polish remover
-
Scouring pads
-
Lestoil
-
Lysol disinfectant cleaner
There is no need to use abrasive cleaners. Abrasive cleaners dull the gloss over a period of years. In extreme cases where the recommended cleaners do not work, use a Chore Boy or 3M Sponge pad. Make sure you use only the ones recommended for Tefl on or non-stick surfaces.
DRAIN CLEANER:
CAUTION: Liquid drain cleaners are recommended over powders and/or crystal; however, when using liquid drain cleaning agents, bail the standing water out of the bathtub and remove the drain plug. Use a funnel to prevent spills and apply the chemicals directly down the drain. Always make certain that chemicals do not come in contact with the acrylic surface.
Use drain cleaners sparingly, so that they do not boil out and attack the acrylic surface.